- Description
- Additional Info
- Reviews
4" Suspension Lift. Are you looking to lift the suspension of your JK Wrangler in order to run a larger set of tires? If you answered yes, should check out Mammoth 4x4's Lift Kit. This Lift Kit will raise your two door Wrangler by a full 4 inches allowing you to run tires up to 37 inches in size. With a set of bigger wheels and a Mammoth Lift Kit installed you will increase your JK's ground clearance to easily traverse hazards and obstacles found on the road and on the trail.
Mammoth 4x4 Shocks. Manufactured using a gas pressurized twin-tube design, these non-adjustable Mammoth 4x4 Shocks have a larger diameter piston to provide better dampening and rebound, when compared to your original factory shocks. Mammoth 4x4 Shocks feature an outer steel housing that is completed in durable black coated finish for impressive good looks and to provide corrosion protection against the elements.
Mammoth 4x4 Coil Springs. The included linear (standard rate) Mammoth 4x4 coil springs are shot peen harden to increase tensile strength for a stronger longer lasting spring. Every Mammoth 4x4 spring is cycled, set and spring rate verified, so you get the expected ride height right out of the box with no settling.
Bolt-On Installation. Designed to be a direct bolt-on replacement for the factory suspension, the Mammoth 4x4 4-inch Lift Kit includes (4) Shocks and (4) Coil Springs, Pitman Arm, extended sway bar links, front and rear track bar relocation brackets and brake line relocation brackets. There is no drilling or modifications required for installation.
Recommended Upgrade. When lifting your 2012-2018 JK Wrangler it is highly recommended to install a set of Exhaust Spacers. After lifting, your JK's front driveshaft will come into contact with the exhaust and can easily melt the CV boot damaging the driveshaft. An Exhaust Spacer Kit will prevent this contact to extend the life of your Wrangler's driveline. Please select from the option listed above.
Application. This Mammoth 4x4 4-inch Lift Kit is specifically designed to fit 2007-2018 Two Door JK Jeep Wranglers. A full 4-wheel alignment should be completed after installation.
Mammoth 4x4 Shocks. Manufactured using a gas pressurized twin-tube design, these non-adjustable Mammoth 4x4 Shocks have a larger diameter piston to provide better dampening and rebound, when compared to your original factory shocks. Mammoth 4x4 Shocks feature an outer steel housing that is completed in durable black coated finish for impressive good looks and to provide corrosion protection against the elements.
Mammoth 4x4 Coil Springs. The included linear (standard rate) Mammoth 4x4 coil springs are shot peen harden to increase tensile strength for a stronger longer lasting spring. Every Mammoth 4x4 spring is cycled, set and spring rate verified, so you get the expected ride height right out of the box with no settling.
Bolt-On Installation. Designed to be a direct bolt-on replacement for the factory suspension, the Mammoth 4x4 4-inch Lift Kit includes (4) Shocks and (4) Coil Springs, Pitman Arm, extended sway bar links, front and rear track bar relocation brackets and brake line relocation brackets. There is no drilling or modifications required for installation.
Recommended Upgrade. When lifting your 2012-2018 JK Wrangler it is highly recommended to install a set of Exhaust Spacers. After lifting, your JK's front driveshaft will come into contact with the exhaust and can easily melt the CV boot damaging the driveshaft. An Exhaust Spacer Kit will prevent this contact to extend the life of your Wrangler's driveline. Please select from the option listed above.
Application. This Mammoth 4x4 4-inch Lift Kit is specifically designed to fit 2007-2018 Two Door JK Jeep Wranglers. A full 4-wheel alignment should be completed after installation.
| Fitment | |
|---|---|
| Vehicle | |
| Category | CollectionDrop |
4" Suspension Lift. Are you looking to lift the suspension of your JK Wrangler in order to run a larger set of tires? If you answered yes, should check out Mammoth 4x4's Lift Kit. This Lift Kit will raise your two door Wrangler by a full 4 inches allowing you to run tires up to 37 inches in size. With a set of bigger wheels and a Mammoth Lift Kit installed you will increase your JK's ground clearance to easily traverse hazards and obstacles found on the road and on the trail.
Mammoth 4x4 Shocks. Manufactured using a gas pressurized twin-tube design, these non-adjustable Mammoth 4x4 Shocks have a larger diameter piston to provide better dampening and rebound, when compared to your original factory shocks. Mammoth 4x4 Shocks feature an outer steel housing that is completed in durable black coated finish for impressive good looks and to provide corrosion protection against the elements.
Mammoth 4x4 Coil Springs. The included linear (standard rate) Mammoth 4x4 coil springs are shot peen harden to increase tensile strength for a stronger longer lasting spring. Every Mammoth 4x4 spring is cycled, set and spring rate verified, so you get the expected ride height right out of the box with no settling.
Bolt-On Installation. Designed to be a direct bolt-on replacement for the factory suspension, the Mammoth 4x4 4-inch Lift Kit includes (4) Shocks and (4) Coil Springs, Pitman Arm, extended sway bar links, front and rear track bar relocation brackets and brake line relocation brackets. There is no drilling or modifications required for installation.
Recommended Upgrade. When lifting your 2012-2018 JK Wrangler it is highly recommended to install a set of Exhaust Spacers. After lifting, your JK's front driveshaft will come into contact with the exhaust and can easily melt the CV boot damaging the driveshaft. An Exhaust Spacer Kit will prevent this contact to extend the life of your Wrangler's driveline. Please select from the option listed above.
Application. This Mammoth 4x4 4-inch Lift Kit is specifically designed to fit 2007-2018 Two Door JK Jeep Wranglers. A full 4-wheel alignment should be completed after installation.
Mammoth 4x4 Shocks. Manufactured using a gas pressurized twin-tube design, these non-adjustable Mammoth 4x4 Shocks have a larger diameter piston to provide better dampening and rebound, when compared to your original factory shocks. Mammoth 4x4 Shocks feature an outer steel housing that is completed in durable black coated finish for impressive good looks and to provide corrosion protection against the elements.
Mammoth 4x4 Coil Springs. The included linear (standard rate) Mammoth 4x4 coil springs are shot peen harden to increase tensile strength for a stronger longer lasting spring. Every Mammoth 4x4 spring is cycled, set and spring rate verified, so you get the expected ride height right out of the box with no settling.
Bolt-On Installation. Designed to be a direct bolt-on replacement for the factory suspension, the Mammoth 4x4 4-inch Lift Kit includes (4) Shocks and (4) Coil Springs, Pitman Arm, extended sway bar links, front and rear track bar relocation brackets and brake line relocation brackets. There is no drilling or modifications required for installation.
Recommended Upgrade. When lifting your 2012-2018 JK Wrangler it is highly recommended to install a set of Exhaust Spacers. After lifting, your JK's front driveshaft will come into contact with the exhaust and can easily melt the CV boot damaging the driveshaft. An Exhaust Spacer Kit will prevent this contact to extend the life of your Wrangler's driveline. Please select from the option listed above.
Application. This Mammoth 4x4 4-inch Lift Kit is specifically designed to fit 2007-2018 Two Door JK Jeep Wranglers. A full 4-wheel alignment should be completed after installation.
| Fitment | |
|---|---|
| Vehicle | |
| Category | CollectionDrop |